File LabView_raw_acceleration_data.rar contains the raw data of the 3-axis accelerometer. It is divided to three subfolders based on the materials used, namely clay, dragonskin, and ecoflex. Each material folder is further subdivided to four subfolders based on the range of the thickness considered, which were 1 mm, 2 mm, 3 mm, and 5 mm. Finally, each folder of the thickness contains 9 TDMS files representing 9 different experiments.
The columns and their corresponding data are as follows:
�	Column C (Voltage_2 (Formula Result)) corresponds to the linear acceleration of the dummy head measured in (g) unit.
�	Column D (Voltage_1 (Formula Result)) corresponds to the force sensor readings in Newton (N). The sensor not used in these experiments.
�	Column E (Voltage_2 (Formula Result)1) corresponds to readings of the accelerometer in the X direction in (g) unit.
�	Column F (Formula Result) corresponds to readings of the accelerometer in the Y direction in (g) unit.
�	Column G (Formula Result 1) corresponds to readings of the accelerometer in the Z direction in (g) unit.
  
Note: to open the TDMS files in Microsoft Excel, you need to install the following Add-In for Microsoft Excel from National Instruments: http://www.ni.com/example/27944/en/

File processed_summary.xlsx contains a summary of the processed data for each experiment subdivided into tabs corresponding to the different materials considered. A total of 108 experiments were conducted and the corresponding videos and raw data were analyzed for impact velocity, peak head linear acceleration, 3ms criterion and the Head Injury Criterion (HIC).


